Facemask SURGICAL MASKS CE marking - Standard EN14683-2019 Type IIR 60 boxes of 50 pieces

Wash your hands thoroughly.
Locate the back and front of the Masks.
Locate the nose clip on the top of the mask.
Position the Masks and tighten on the nose area.

How do I put on, use and remove a mask, and what do I do with used Masks?

• Before putting on a mask, wash your hands with soap and water or a hydro-alcoholic solution.
• Apply the mask so that it covers your nose and mouth, and make sure it fits snugly on your Face; check that there is no jet of air in your eyes when you breathe out heavily.
• For FFP masks, a tightness check must be carried out: cover the filtering surface of the mask using a plastic sheet held in place with both hands. Inhale: the mask should press lightly against the face. If the mask does not settle, it is not watertight and needs to be readjusted.
• Whenever you touch a used mask, wash your hands with soap and water or a hydro-alcoholic solution.
• If you need to eat or drink, change your mask.
• When it becomes damp, replace it with a new mask. Do not reuse single-use masks.
• To remove the mask: if wearing gloves, remove them and wash your hands with soap and water or with a hydro-alcoholic solution.
• Then remove the mask from behind (do not touch the front of the mask); dispose of it immediately in a closed waste bin, or, if it is a reusable consumer mask, isolate it in a plastic bag while waiting to wash it; wash your hands with soap and water or with a hydro-alcoholic solution.

For generic instructions for use

To view the certificate, click on this link.