🚚 Free delivery in France from €49 of purchase 🌍 Shipping across the European Union

Juvederm Volift Lidocaine Syringes Pre-filled With 2x1ml

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 120.71ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
€229.00
From €79.00
Juvederm Volift Lidocaine Syringes Pre-filled With 2x1ml
Juvederm Volift Lidocaine Syringes Pre-filled With 2x1ml
Description Our selection Customer reviews

JUVEDERM
Volift with lidocaine
For contouring and restoring volume to the face
Hyaluronic Acid: 17,5mg
Medical device
Contains 2 syringes of 1mL of Juvéderm® VOLIFTTM with Lidocaine, 4 sterile needles of 30G1/2", single use and reserved for the injection of Juvéderm® VOLIFTTM with Lidocaine, a leaflet and a set of labels to ensure traceability.

Juvéderm® VOLIFT with Lidocaine is a sterile, pyrogen-free, physiological cross-linked hyaluronic acid gel of non-animal origin. This gel comes in a single-use, pre-filled, graduated syringe.

- Juvéderm® VOLIFTTM with Lidocaine is an injectable implant in gel form, intended for the treatment of deep cutaneous depressions such as those associated with premature ageing.
- Juvéderm® VOLIFTTM with Lidocaine is also indicated for reshaping the contours and restoring the volumes of the Face to correct structural defects such as asymmetry, irregularity of the contours, loss of volume of the lips, cheeks, chin, etc.
- Juvéderm® VOLIFTTM with Lidocaine is administered by injection into the deep dermis or the mucous membrane of the Lips by a practitioner.
- The presence of lidocaine is designed to reduce the patient's sensation of pain during treatment.

Please note that the injection of JUVÉDERM VOLIFT WITH LIDOCAINE requires a medical procedure that can only be carried out by a doctor (a doctor specialising in dermo-aesthetics, dermatologist, plastic surgeon).

THE PRODUCTS SOLD ON OUR WEBSITE ARE PARAPHARMACEUTICAL PRODUCTS AND ARE THEREFORE AVAILABLE OVER THE COUNTER AND DO NOT REQUIRE A PRESCRIPTION.

This is a medical device
This product cannot be returned or exchanged.

The composition may be subject to variations, so we advise you to always check the list on the purchased product.

Composition:

Hyaluronic Acid Gel 17.5 mg
Lidocaine hydrochloride 3 mg
Phosphate buffer pH 7.2 q.s.p. 1 mL
One syringe contains 1mL of Juvéderm® VOLIFTTM with Lidocaine.


CONTRAINDICATIONS
- Do not inject Juvéderm® VOLIFTTM with Lidocaine into the periorbital area (eyelid, ring, crow's feet) and glabellar area.
- Do not inject into blood vessels (intravascular). Intravascular injections can lead to embolisms, vascular occlusions, ischaemia or infarction.
- Do not overcorrect.
- Juvéderm® VOLIFTTM with Lidocaine must not be used in :
- patients suffering from epilepsy not controlled by treatment ;
- patients with a tendency to develop hypertrophic scars;
- patients with a known hypersensitivity to hyaluronic acid and/or gram-positive bacterial Proteins, as hyaluronic acid is obtained from bacteria such as Streptococcus ;
- patients with a known hypersensitivity to lidocaine or amide-type local anaesthetics;
- patients suffering from porphyria;
- pregnant or Milk feeding women;
- children.
- Juvéderm® VOLIFTTM with Lidocaine must not be used on areas with inflammatory and/or infectious skin problems (acne, herpes, etc.).
- Juvéderm® VOLIFTTM with Lidocaine must not be used in immediate association with laser treatment, deep chemical peeling or dermabrasion. In the case of superficial peeling, it is recommended not to inject if the inflammatory reaction provoked is significant. PRECAUTIONS FOR USE
- Juvéderm® VOLIFTTM with Lidocaine is not indicated for injections other than intradermal and into the mucosa of the Lips.
- The practitioner's attention is drawn to the fact that this product contains lidocaine and that this must be taken into account.
- Juvéderm® VOLIFTTM with Lidocaine is not intended for breast augmentation/reconstruction.
- In general, the injection of medical devices carries a risk of infection. The usual precautions for an injectable product must be observed.
- There is no clinical data available on the injection of juvederm® VOLIFTTM with Lidocaine into an area that has already been treated with a filler not manufactured by ALLERGAN.

- It is recommended not to inject into a site treated with a permanent implant.
- There are no clinical data available in terms of efficiency and tolerance for the injection of Juvéderm® VOLIFTTM with Lidocaine in patients with a history of autoimmune disease or a deficiency of the immune system or who are undergoing immunosuppressive treatment. The practitioner must therefore decide on the indication on a case-by-case basis, depending on the nature of the disease and the associated treatment, and must ensure special monitoring of these patients. In particular, it is recommended that a hypersensitivity skin test be performed on these patients beforehand, and that they not be injected if the disease is progressive.
- There is no clinical data available on the tolerability of injecting Juvederm® VOLIFTTM with Lidocaine in patients with a history of severe and/or multiple allergies. The practitioner will therefore have to decide on the indication on a case-by-case basis, depending on the nature of the allergy, and will have to ensure special monitoring of these at-risk patients. In particular, it may be decided to carry out a hypersensitivity skin test or appropriate preventive treatment prior to any injection. In the event of a history of anaphylactic shock, it is recommended that the product not be injected.
- Patients with a history of streptococcal disease (recurrent angina, rheumatic fever) should undergo a hypersensitivity skin test prior to any injection. In the case of rheumatic fever involving the heart, it is recommended not to inject.
- Patients undergoing anti-coagulant treatment or using substances that may prolong bleeding (warfarin, acetylsalicylic acid, non-steroidal anti-inflammatory drugs, or other substances known to increase clotting time such as herbal Supplements containing garlic or ginkgo biloba, etc.) should be warned of the potential increased risk of bleeding and haematomas when injected.
- There are no data on the safety of injecting more than 20 mL of ALLERGAN fillers per 60kg of body weight per year.
- As this product contains lidocaine, the combination of Juvéderm® VOLIFTTM with Lidocaine with certain drugs that reduce or inhibit hepatic Metabolism (cimetidine, beta-blockers, etc.) is not recommended.
- As this product contains lidocaine, Juvéderm® VOLIFTTM with Lidocaine should be used with caution in patients with cardiac conduction disorders.
- Patients should be advised not to wear make-up for 12 hours after the injection and to avoid prolonged exposure to the Sun, UV rays, temperatures below 0°C, as well as saunas and steam baths for a fortnight after the injection.
- The composition of the device makes the product compatible with the fields used for magnetic resonance imaging.

INCOMPATIBILITIES
There is a known incompatibility between Hyaluronic Acid and quaternary ammonium salts such as benzalkonium chloride. Juvéderm® VOLIFTTM with Lidocaine should therefore never be placed in Contact with such products, or with medical and surgical equipment treated with this type of product.
There is no known interaction with other local anaesthetics.

UNDESIRABLE EFFECTS
The patient must be informed that there are potential side effects associated with the implantation of this device, which may occur immediately or may be delayed. These include (but are not limited to)
- Inflammatory reactions (redness, oedema, erythema...) which may be associated with itching, pain on pressure or tingling may occur after injection. These reactions may persist for up to a week. In particular, it should be noted that injection into the mucous membranes is likely to cause more oedema and haematomas due to the particular physiology of these tissues. The practitioner may therefore recommend a preventive anti-inflammatory treatment.

- Haematomas.
- Induration or nodules at the injection site.
- Colouring or discolouration of the injection area may be observed, particularly when the filler is injected too superficially into thin Skin (Tyndall effect).
- Poor efficiency or filling effect.
- Rare but serious adverse events associated with intravascular injection of facial fillers and tissue compression have been reported. These include temporary or permanent blurring of vision, blindness, cerebral ischaemia or haemorrhage leading to stroke, necrosis of the Skin and damage to underlying structures. Stop the injection immediately if a patient experiences any of the following symptoms, changes in vision, signs of stroke, blanching of the skin or unusual pain during or shortly after injection. Such patients should receive prompt medical attention and, if possible, assessment by a specialist physician if an intravascular injection occurs. Cases of abscess, granuloma and immediate or delayed hypersensitivity have also been reported following injection of Hyaluronic Acid and/or lidocaine. These potential risks should therefore also be taken into account.
- The persistence of inflammatory reactions beyond one week or the appearance of any other side effect must be reported by the patient to the practitioner as soon as possible, who will have to remedy the situation with appropriate treatment.
- Any other undesirable side effects related to the injection of Juvéderm® VOLIFTTM with Lidocaine should be reported to the distributor and/or manufacturer.

WARNINGS
- Check the expiry date on the label.
- If the contents of the syringe show signs of phasing and/or appear cloudy, do not use the syringe.
- Do not reuse. If this device is reused, the sterility of the product cannot be guaranteed.
- Do not resterilise.
- For needles ( 0123 Laboratoire TSK , Japan):
European Representative:
Emergo Europe
Molenstraat 15
2513 BH The Hague (NL)
- Used needles should be disposed of in a special collector. Proceed in the same way for syringes. Refer to the directives in force for their disposal.
- Never attempt to straighten a bent needle, but discard and replace it.

STORAGE CONDITIONS
- Store between 2°C and 25°C.
- Fragile.

- This device is intended to be injected into the dermis or the mucosa of the Lips by authorised medical personnel in accordance with the applicable local regulations. As precision is essential to the success of the treatment and in order to minimise the potential risk of complications, this device should only be used by practitioners who have received appropriate training and experience in the injection technique for wrinkle filling, contouring and volume restoration of the Face.
They must have a good knowledge of the anatomy and physiology around the injection site.
- The use of 30G1/2" needles is recommended. However, depending on the technique chosen by the practitioner, sterile 25G, 27G or 30G cannulas can be used (see list below). The choice of cannula length is defined by the user according to their injection technique. For use in the Lips, the use of 25G cannulas is not recommended (see list below).

- The contraindications, instructions for use, precautions for use and warnings defined for needles in this leaflet also apply to the cannulas referenced above if they are used with this product.
- Juvéderm® VOLIFTTM with Lidocaine must be used in its original packaging as supplied. Any modification or use of this product outside the conditions of use defined in this leaflet may adversely affect its sterility, homogeneity and performance, which cannot be guaranteed.
- Before treatment, practitioners must inform their patients of the device's indications, contraindications, incompatibilities and potential adverse effects/risks associated with the injection of a filling product and ensure that patients are aware of the signs and symptoms of a potential complication.

- Prior to injection, rigorously disinfect the area to be treated.
- Remove the cap from the syringe by pulling it off as shown in fig. 1. Then, by firmly inserting the needle supplied with the product (fig. 2) onto the tip of the syringe, gently screw it in a clockwise direction.
Turn it further until it is locked and the needle cap is in the position shown in fig. 3.
If the cap is positioned as shown in fig. 4, the needle is not correctly attached.
Then, with the syringe body held in one hand and the cap in the other (fig. 5), remove the cap by pulling it off.
Before injecting, press down on the plunger rod until the product comes out of the needle.
Inject slowly and apply as little pressure as possible.
If the needle is blocked, do not increase the pressure on the piston rod, stop the injection and replace the needle.
Failure to observe these precautions may result in the needle coming loose and/or product leaking from the luer lock and/or increase the risk of vascular accidents.
- After inserting the needle and before injecting, it is recommended to perform a slight retroaspiration to check that the needle is not in a blood vessel.
- If whitening of the treated area occurs immediately during injection, the injection should be stopped and appropriate treatment should be considered, such as massaging the area until normal Colouring returns.
- The degree and duration of correction depend on the nature of the defect treated, the tissue stress at the injection site, the depth of implantation in the tissue and the injection technique. The quantity to be injected depends on the area to be corrected and is based on the practitioner's experience.
- Do not over-correct, as injecting too much may cause undesirable effects such as tissue necrosis or oedema.
- Touch-up (to achieve optimal correction) and/or repeated treatment (to maintain optimal correction) with Juvéderm® VOLIFTTM with Lidocaine may be required.
- It is recommended to wait for the resolution of side effects (with a minimum interval of 2 weeks) between 2 injections.
- After the injection, it is important to massage the treated area to ensure that the product is evenly distributed.

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 7.26ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 120.55ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
THE #EASYPARA NEWSLETTER
Join our 100% beauty and well-being community to enjoy our latest news and exclusive offers, specially designed for you. We are there to be by your side!
First Name
Email
My items (0)